How do I connect to my exetel modem?

Enter the default router logins to go in to the modem interface page:

1. Username- admin. Password- admin.
2. Username- admin. Password- admin.
3. Select “Basic” from the left-hand side menu which will take you to below page. Fill in the fields as advised below.
4. Click on “Apply”
5. Click “Apply”

Correspondingly, what modem does exetel use?

Your Exetel Home Wireless Broadband service comes with a powerful NetComm 4G modem which is ready to use. Simply plug and play and you are instantly connected to the Optus 4G Plus mobile data network with internet speeds up to 12/1Mbps. The modem supports 64 simultaneous connections and has 4 x Gigabit Ethernet ports.

Subsequently, question is, how do I connect my ZTE modem to NBN? ZTE H268A modem guide – nbn™ FTTP/HFC/FTTC/Fixed Wireless

1. step 1 - hard reset your modem.
2. step 2 - connect to your modem via Wi-Fi or Ethernet.
3. step 3 - enter the MATE settings into your modem.
4. step 4 - plug your modem into the nbn™ device.

Secondly, how do I connect my ZTE modem?

Using the ZTE USB modem with AutoPlay enabled

1. Insert the ZTE USB modem into the USB port. AutoPlay displays the following dialog:
2. Click on the Run autorun.exe link.
3. Click on the Yes button.
4. Click on the centre button in the middle of the dialog to connect to the Internet.

Are exetel modems locked?

Not locked. If using with another ISP/RSP it may help to disable TR-69 if its enabled on the modem.

Related Question Answers

How long does exetel take to connect?

For fibre-to-the-premises (FTTP) with an external nbn™ box installed and fibre-to-the-node (FTTN) fibre-to-the-curb (FTTC) and fibre-to-the-basement (FTTB) between 2-3 weeks. For Hybrid fibre-coaxial (HFC) 4 weeks. 2-3 days if both internal and external nbn™ boxes have been installed for fibre-to-the-premises (FTTP).

How does home wireless broadband work?

Home wireless broadband is technology that allows a modem to connect to the internet remotely. In this case, the connection we will be looking at is over the mobile phone network; however, wireless broadband can also be delivered through satellite connection.

How do I contact exetel?

Call us: 13 39 38

Exetel is fully operational, however as we are handling a higher number of calls during this period it may take us a little longer to attend your call.

Can I use NBN without modem?

Yes, you do require an nbn™ compatible router or modem. If your nbn™ is serviced via Fibre to the Premises (FTTP), Fixed Wireless, Hybrid-Fibre Coaxial (HFC), or Fibre to the Curb (FTTC) then your modem must have a WAN or Internet port – here are some recommendations.

Is Optus wireless broadband any good?

Given the features of the modem, the current price and data inclusions, Optus Wireless Broadband is a great solution for anyone having an issue with the NBN at home or at the office of a small business. At its best, the service is on par with an NBN 50 connection, and its worst, its like an NBN 25 service.

Is exetel a good NBN provider?

Exetel places 7th on the leaderboard below Telstra, Optus, iiNet, TPG and Aussie Broadband. It's the third-lowest ranking NBN provider, beating only MyRepublic and Dodo/iPrimus.

Is ZTE Router good?

This is an extremely good router for the cheap price it is. 5Ghz wifi is good in my home, but not as solid as my wrt1900acs with custom long tplink antennas. The admin interface is good, but not as advanced as my wrt1900acs. This router is very easy to setup.

What is a ZTE router?

ZTE Routers

A router is a device on your network that is connected between all of your home network devices and your Internet Service Provider, or ISP.

What is the username and password for ZTE router?

The default username for your ZTE router is admin. The default password is admin.

How do I configure my modem?

Power on your router and computer first and then modem.

1. Log into the router's web-based management page.
2. Configure WAN Connection Type.
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I reset my ZTE modem?

From the back of your device, locate the Reset button hole. It can be found between the WPS and WLAN buttons. Using a thin object, such as a toothpick or pin, press and hold the reset button for at least 30 seconds. Release the reset button.

How do I configure a USB modem?

How to Use a USB Modem

1. Connect your USB modem to a USB port on your computer. Windows automatically detects the modem and installs drivers for you.
2. Click the "Set up a connection or network" link.
3. Type your dial-up number, username and password into the text boxes.
4. Click the "Connect" button.

How do I set up my ZTE dongle?

To install:

1. Plug the MF823 modem into a USB port. Windows will detect the new hardware automatically and install an icon on the Windows desktop:
2. Once this icon appears, the dongle light turns blue or green.
3. You should now be able to access the internet connection by starting your web browser or other application.

How do I log into my Hathway ZTE router?

Start with opening your favorite browser,then in theaddress bar enter the IP Address You will now be taken to the login page where you can enter thedefault username: admin and password: admin. Change ZTE ZXHN H108N default Login and Password or reset it ifyou dont remember.

How do I change the channel on my ZTE router?

Changing the wireless channel on the single-band ZTE Hyperhub router:

1. Enter “192.168.1.1” into your web browser.
2. Enter your Login credentials (these are displayed on the back of your router)
3. Select 'Network'
4. Select 'Basic'
5. On the main page select the drop down next to 'Channel'

How do I set up my Telus ZTE Smart Hub?

How to set up your TELUS Smart Hub – Direct

1. Plug the SIM card into the back of the TELUS Smart Hub device.
2. Plug the power cord into the back of the device.
3. Plug the RJ45 cable into the LAN port of the device.
4. Plug the RJ45 cable into the LAN port of the computer Switch on the TELUS Smart Hub.

Are Internode modems locked?

You need to purchase an Internode modem to use the included NBN Phone service. The modem costs $99.95 on a no lock-in contract (discounted to $59.95 if you take a 6 month contract) plus $15 delivery fee. The Internode modem is WiFi enabled for connecting wireless devices.

Are modems locked to a network?

On rare occasions an ISP will 'lock' a modem, so it only works on its own service. If you are one of the unfortunate few who have to go through this experience, your first port of call will be to ask the previous ISP if they can remove the locking codes; in most cases they will oblige.